Dimitris Evdox

Dimitris Evdox

Άγιοι Απόστολοι, Εύβοια
Dimitris Evdox
Περισσότερες ιδέες από το Dimitris
How to build and install a barn door. Great step by step instructions and pictures :). I tried to buy so e a while back...here's my solution!

How to build and install a barn door. Great step by step instructions and pictures :). I tried to buy so e a while back...here's my solution!

как правильно повесить смеситель

как правильно повесить смеситель

Cada una de las viviendas se planearon a detalle poniendo atención en las proporciones, elegantes acabados y sofisticados materiales. | Galería de fotos 5 de 7 | AD MX

Cada una de las viviendas se planearon a detalle poniendo atención en las proporciones, elegantes acabados y sofisticados materiales. | Galería de fotos 5 de 7 | AD MX

Bathroom inspo (via Design Milk)

Bathroom inspo (via Design Milk)

+ lavabo et crédence en marbre noir +

+ lavabo et crédence en marbre noir +

like the black frames

like the black frames

DIY is here:  http://www.remodelaholic.com/2012/09/diy-dutch-barn-door/

DIY is here: http://www.remodelaholic.com/2012/09/diy-dutch-barn-door/

frame detail - looks like sheet metal, aluminum sheet and glass. I wonder what the screws are?:

frame detail - looks like sheet metal, aluminum sheet and glass. I wonder what the screws are?:

3. Place your drill 1.5 inches from the top of the bend. Drill a 7/32″ pilot hole through both sides of the bended rod. To prevent from burning out your drill bit, you  may want to dip your drill bit periodically into some engine oil. If it does get dull, sharpen the tip with your grinder.    4. Using a crowbar, pry the bent end of the bar away from the straight end to make room to insert the wheel. Only pry it about 45 degrees.

3. Place your drill 1.5 inches from the top of the bend. Drill a 7/32″ pilot hole through both sides of the bended rod. To prevent from burning out your drill bit, you may want to dip your drill bit periodically into some engine oil. If it does get dull, sharpen the tip with your grinder. 4. Using a crowbar, pry the bent end of the bar away from the straight end to make room to insert the wheel. Only pry it about 45 degrees.