ιωαννης
Περισσότερες ιδέες από το ιωαννης
IMG_3345.JPG

IMG_3345.JPG

Wall Wine Rack 8 Bottle Holder Storage Display complements any bare wall or wine bar  https://www.etsy.com/listing/263455963/wall-wine-rack-8-bottle-holder-storage?ref=listing-shop-header-1

Wall Wine Rack 8 Bottle Holder Storage Display complements any bare wall or wine bar https://www.etsy.com/listing/263455963/wall-wine-rack-8-bottle-holder-storage?ref=listing-shop-header-1

pallet-vegetable-storage-rack.jpg (735×1102)

pallet-vegetable-storage-rack.jpg (735×1102)

Reciclando

Reciclando

Ohio River driftwood, converted lantern, brass table top, and massive rope all come together perfectly for this awesome "nautical feel" floor lamp.

Ohio River driftwood, converted lantern, brass table top, and massive rope all come together perfectly for this awesome "nautical feel" floor lamp.

3d8410e195e072c7c0b02ef81c3c8667.jpg 600×450 pixels

3d8410e195e072c7c0b02ef81c3c8667.jpg 600×450 pixels

Good for pallets, unfinished, rough edges and love of wood working... Think…

Good for pallets, unfinished, rough edges and love of wood working... Think…

Upcycled Cable drum table and bench set

Upcycled Cable drum table and bench set

I made a small pallet shelf to fit in a small bathroom, just so there would be some extra storage.  I was lucky to find a pallet with long and wide planks, and I used those for the back.  Then I ripped down a piece of a pallet that had 3/4" wood on it, and made some cleats for some extra support on the shelves.  Then screwed into the shelves from the back with 2.5" screws, as well as screwing into the top of the shelves into the cleats to make sure the shelves are not going anywhere.

I made a small pallet shelf to fit in a small bathroom, just so there would be some extra storage. I was lucky to find a pallet with long and wide planks, and I used those for the back. Then I ripped down a piece of a pallet that had 3/4" wood on it, and made some cleats for some extra support on the shelves. Then screwed into the shelves from the back with 2.5" screws, as well as screwing into the top of the shelves into the cleats to make sure the shelves are not going anywhere.