Pvc feeder

This water station made from a thick PVC pipe is great for watering domestic pets or wildlife. #Instructables #outdoors #backyard #bushfire #feeder #animals #trough

PVC pipe feeder

PVC Chicken Feeder: A simple, inexpensive way to feed the chicks and minimize waste!

My favorite of the automatic chicken feeder designs readers have submitted so far is Darren Simmons' PVC feede

Do you know How To Make DIY PVC Chicken Feeders? PVC pipes are not just for plumbing, they are surprisingly perfect for making chicken feeders too. Using PVC

I made this chicken feeder. It is made out of 1 piece of 3 inch pipe 2 end caps and one 90° elbow. I cut a 1.5 foot piece off one end and drilled 1.75 inch holes with a door knob style hole cutter. I fit them together and stuck it through the hole in the chicken wire resting it on the bottom. I attached it to the 2"x4" with a metal strap with a piece of 1"x3"x 4" spacer made of scrap wood. I put a handle on the top of the top end cap.for easy removal and easy filling. Chickens are already…

Chickens: the gift that keep on giving.

Put together my first pipe feeder in the garage tonight...check it out! I was a bit concerned that the chickens would peck at the screws but they will be...

Do you know How To Make DIY PVC Chicken Feeders? PVC pipes are not just for plumbing, they are surprisingly perfect for making chicken feeders too. Using PVC

SIMPLE INVENTIONSA very useful idea for every man! To the garage or workshop !!Friends, my name is Sergey! I am the author of the channel HandiCrafts. On thi...

I made a deer feeder today out of 4"PVC pipe. Not much too it but I think it should work great. This will hold 50# of corn. It is about 5' tall and teh...

I have my feeders outside and they've stayed dry. The little hood seems to do the trick. The hood is a modified adapter used to connect pvc to gutters.

I'm in the process of making some feeders for my coturnix pens out of 3" PVC. Planning on just using a uni-bit to drill some holes for the quail to...

This is an octagonal round hay bale feeder I have made. I was unable to find anything that was light weight, portable and rust proof so I made this one from 50MM PVC pipe. Roof frame is made from 25mm PVC. Every joiner for the two main "rings" is 45 degree. Screwed together with 25mm self tapping screws.

Goat feeder. Used 10 inch PVC pipe. Cut with sawzall. Drilled few holes for water drainage. Great indoors or outdoors. Smaller version works great for mineral and baking soda free feed dispenser inside of building.

Large goat feeder using 10 inch pvc pipe. Cut out feed holes with sawzall. Drill holes on bottom for water drainage. Attached to wooden tie with pipe hanger straps and large nail for stability. Great inside and outside of building.