Concrete & Mortar Additives

27 Pin58 Ακόλουθοι
AQUAMAT ADMIX: Concrete waterproofing admixture in powder form that is added during concrete preparation forming insoluble crystalline compounds. Improves resistance to water permeability and does not affect vapor permeability of concrete. It remains permanently active and receives equally well positive and negative hydrostatic pressure. Suitable for waterproofing foundations, basements, tanks, wastewater treatment, swimming pools etc.

AQUAMAT ADMIX: Concrete waterproofing admixture in powder form that is added during concrete preparation forming insoluble crystalline compounds. Improves resistance to water permeability and does not affect vapor permeability of concrete. It remains permanently active and receives equally well positive and negative hydrostatic pressure. Suitable for waterproofing foundations, basements, tanks, wastewater treatment, swimming pools etc.

DS-99: Additive for tile adhesives and joint grouts. Improves properties such as bonding to substrate, abrasion resistance and water-impermeability.

DS-99: Additive for tile adhesives and joint grouts. Improves properties such as bonding to substrate, abrasion resistance and water-impermeability.

DS-99: Additive for tile adhesives and joint grouts. Improves properties such as bonding to substrate, abrasion resistance and water-impermeability.

DS-99: Additive for tile adhesives and joint grouts. Improves properties such as bonding to substrate, abrasion resistance and water-impermeability.

ADIFLEX-B: Polymer dispersion - Elastifying agent for waterproofing slurries (when added to AQUAMAT or cement mortars) or cementitious tile adhesives (when added to Isomat® AK 20, Isomat® AK 10 etc.). Replaces all or part of the mixing water. Necessary for applications on dimensionally unstable substrates, subject to vibration or contraction-expansion.

ADIFLEX-B: Polymer dispersion - Elastifying agent for waterproofing slurries (when added to AQUAMAT or cement mortars) or cementitious tile adhesives (when added to Isomat® AK 20, Isomat® AK 10 etc.). Replaces all or part of the mixing water. Necessary for applications on dimensionally unstable substrates, subject to vibration or contraction-expansion.

ADIFLEX-B: Polymer dispersion - Elastifying agent for waterproofing slurries (when added to AQUAMAT or cement mortars) or cementitious tile adhesives (when added to Isomat® AK 20, Isomat® AK 10 etc.). Replaces all or part of the mixing water. Necessary for applications on dimensionally unstable substrates, subject to vibration or contraction-expansion.

ADIFLEX-B: Polymer dispersion - Elastifying agent for waterproofing slurries (when added to AQUAMAT or cement mortars) or cementitious tile adhesives (when added to Isomat® AK 20, Isomat® AK 10 etc.). Replaces all or part of the mixing water. Necessary for applications on dimensionally unstable substrates, subject to vibration or contraction-expansion.

POLYPROPYLENE FIBERS: Polypropylene fibers 12 mm long, for reinforcing of concrete and mortars.

POLYPROPYLENE FIBERS: Polypropylene fibers 12 mm long, for reinforcing of concrete and mortars.

ISOCURE-A: Water-based, acrylic emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures the full hydration of cement, thus it reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. It is also suitable for vertical surfaces. There is no need of removing ISOCURE- A in case of subsequent layers on the concrete surface.

ISOCURE-A: Water-based, acrylic emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures the full hydration of cement, thus it reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. It is also suitable for vertical surfaces. There is no need of removing ISOCURE- A in case of subsequent layers on the concrete surface.

ISOCURE: Paraffin - based, water emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures the full hydration of cement, thus it reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. In case of subsequent layers on the concrete surface, ISOCURE must be removed by water blasting.

ISOCURE: Paraffin - based, water emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures the full hydration of cement, thus it reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. In case of subsequent layers on the concrete surface, ISOCURE must be removed by water blasting.

SPLIT-2000 (former ASIKON-2000): Deshuttering coating for all types of wooden or steel-faced formwork.

SPLIT-2000 (former ASIKON-2000): Deshuttering coating for all types of wooden or steel-faced formwork.

LATEX: Polymer latex. When added into the building mortars and coatings, it increases bonding to the substrate, provides water impermeability and elasticity. It is suitable for creating bonding layers, repairing mortars, floor screeds resistant to abrasion, waterproof cement mortars, mortars resistant to chemicals, plasters with high strength and water impermeability etc.

LATEX: Polymer latex. When added into the building mortars and coatings, it increases bonding to the substrate, provides water impermeability and elasticity. It is suitable for creating bonding layers, repairing mortars, floor screeds resistant to abrasion, waterproof cement mortars, mortars resistant to chemicals, plasters with high strength and water impermeability etc.

Pinterest
Αναζήτηση