Katsaros Miltiadis

Katsaros Miltiadis

Katsaros Miltiadis
More ideas from Katsaros
Base para usar un motortool como router

Sorry, I didn't think about making a tutorial until after I had gotten the pieces together (except gluing), so I don't have any pics except the finished pie.

Make Your Own 3D Printing Filament by Building Your Own Filament Extruder http://3dprint.com/56759/diy-filastruder-instructables/

Make Your Own Printer Filament by Building Your Own Filament Extruder

Makerbottable toolholders by Webca - Thingiverse

Here are some miscellaneous toolholders that can be scaled to fit practically any tool.

Perfecto para hacer uniones sin tanto rollo

It's easy to make face frames with this shop-made doweling jig. A little scrap and a couple of bushings are all it takes.

Here's a slick way to store a whole cluster of tools on pegboard with only two pegs. Cut some 2-1/2 in. wide mini shelves; drill holes or slots for router bits, screwdrivers, chisels and files; then drill a couple of 1/8-in. holes in the edges for the 1/8-in. diameter pegs. With a vise and pliers, bend the pegs to about 85 degrees and hammer them into the holes. Be sure the pegs fit tightly in the wood so the shelves can't fall off.

Pegboard Shelves store a lot of tools with only two pegs. Bend the pegs to about 85 degrees. Use 1 x 3 boards for shelves, customize slots for tools, drill peg holes from end, hammer pegs in, make sure they fit tightly.